I've used a bottle jack with no problems, just be sure to use a thick board to spread out the force. You need to get the hex bolt heads underneath the mounts cleaned out completly and tap the hex wrench in solid before trying to loosen the bolt. If you strip the head out you get to remove the bearer arm and them cut the mount in half to remove it.
Alan Duff Knoxville, TN On Wed, 31 Aug 2005 19:09:32 -0500, Peter Frederick <[EMAIL PROTECTED]> wrote : > Jack under the oil pan with a board on the jack (use ONLY a floor jack, > not a bottle jack, please!). Yes, you should probably replace the > tranny mount as well, it's usually in better shape, but when they get > soft, you get excessive driveline vibration. > > Peter >