I was hoping the noise was, well its probably not caused by a bad mount but I was hoping a bad mount was allowing the noise to transmit into the car.
I will check for loose bolts but it seems like it might move around if that were the case, the car drives fine other than being a little (annoyingly) extra noisy. -Curt --- On Wed, 9/24/08, Mitch Haley <[EMAIL PROTECTED]> wrote: From: Mitch Haley <[EMAIL PROTECTED]> Subject: Re: [MBZ] 190D diff continued To: [EMAIL PROTECTED], "Mercedes Discussion List" <mercedes@okiebenz.com> Date: Wednesday, September 24, 2008, 8:38 AM > --- On Tue, 9/23/08, Frederick W Moir <[EMAIL PROTECTED]> wrote: > The 201 diff. bolts to the sub-frame, no mounts. Curt Raymond wrote: > Curses! > Why? Because you wanted to buy rubber diff mounts and the tools to press out the old and press in the new? Or because you hoped that the noise was caused by bad mounts? I'm thinking it's possible the noise could be caused by loose bolts, but I don't think it's likely. Mitch. _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com