Might work, they can't be dimmed though... I'm thinking about putting LEDs in my motorcycle, every watt I can save is a good thing. I've got a bag of LEDs, just need to get resistors and I'll break the guts out of some bulbs leaving the base to mount the LED and resistor in.
-Curt Date: Mon, 27 Oct 2008 20:54:27 -0400 From: Allan Streib <[EMAIL PROTECTED]> Subject: [MBZ] OT: seeking source for 8mm 12v white LEDs To: mercedes@okiebenz.com Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii I am wanting to replace some burned out dash lamps in my VW Vanagon. The lamps in question are for the panels around heat/vent controls. The bulbs I removed are housed in plastic barrels that are 8mm in diameter; the barrels push-fit into a recepticles on the back of the illuminated panels. My thought is to replace them with LEDs, it seems that 8mm is a standard LED size but I'm not sure where to source these. I found this on eBay: http://tinyurl.com/6e2u5k Anyone think those would be appropriate? Or know of any other good sources? I want something approximately as bright as the original lamps and that will dim appropriately if I dim the dash lights. Allan -- 1983 300D _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com