Use a stick welder with Stainless steel rod.
grind a V at the cracks. fill the V with weld. make multiple passes
if needed to fill the V Watch for additional cracking.
You can buy SS rod at a farm store or a Welding supply.
At 08:00 AM 11/26/2008, you wrote:
Nope. Cast iron has too tight a grain and will crack as it cools.
You can braze it but you need to heat MUCH more than where you're
going to repair. Apparently a rosebud tip is pretty much required
for that kind of work.
-Curt
Date: Tue, 25 Nov 2008 23:13:00 -0500
From: Allan Streib <[EMAIL PROTECTED]>
Subject: [MBZ] OT: welding cast iron
To: mercedes@okiebenz.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=us-ascii
I have a bench in the yard, park bench-style, cast-iron frame and wooden
slats. Part of the frame is cracked -- can I weld this with a flux-core
MIG?
Allan
--
1983 300D
_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Loren Faeth
_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com