The most common cause for this is a cracked bleed line. Tom Hargrave www.kegkits.com
Quoting OK Don <[EMAIL PROTECTED]>: > I seem to be collecting fuel at the base of the #2 injector on the '87 > 603 engine, but I can't tell where it's coming from. It's not obvious. > There is also a light coating of fuel on top of the injection pump. I > hung 4X5 inch film between the IP and the fuel filter, and another > peice between the IP and the block to try to see if the fuel was > coming from one place and spraying around, but didn't detect any. > Any ideas? > > > > > It does beg the question what is the plastic collar for? > > > > Not sure except to distinguish between vertical and inclined > injectors! > > There may be another reason, but I don't know what it is. May be to > > prevent/minimize the accumulation of any wetness (fuel or water) at > the > > base of the injector(s). > > > > Marshall > > -- > OK Don, KD5NRO > Norman, OK > '87 300SDL, '81 240D, '78 450SLC > The FSM created the Diesel Benz > http://www.venganza.org/ > > _______________________________________ > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >
