Holy crap, that sounds like a great deal!
Kaleb C. Striplin wrote:
here is the email I got from the dude, no affiliation etc:
Kaleb,
I completely dismantle the units, clean, examine,evaluate and
ultimately replace all worn components...I also effect specific
modifications to the main bakelite housing which greatly reduce the
potential for future leaks and cracks = longer operating life. Once all
components are properly prepared I reassemble them using new hardware
while properly setting the timing. Finally, with the unit rebuilt, I
install it on a test bench and verify its proper function. I guarantee
my rebuilds for 1 year ...including my paying the cost of shipping (
both ways) should you require service due to the malfunction of one of
my rebuilt units.
Kaleb,
To rebuild servo with uncracked housings = US$220.00 + shipping
To rebuild servo with a cracked housing add US$35.00 to above.
For further info call Doug at 514-484-7546 after 7:00 PM
--
John L. Ervine
1981 240D 4-spd 268+kmi
1980 300TD 170+kmi
1980 300SD 277+kmi
1977 280S 4-spd 80+kmi
