I hear that B100 is really good for that.
--
John W Reames
jwrea...@comcast.net
Home: +14106646986
Mobile: +14437915905
On Feb 17, 2010, at 6:12, "LarryT" <l02tur...@comcast.net> wrote:
OK - Thanks to Don & Peter - it just seemed a couple of the bolts
were little more than finger tight - but I guess 18.4 #'s Ft. is not
much more than finger tight.
OK - no Locktite - but I will put a dab on anti-seize on the bolts -
*Now for my next question:* Has anyone found a good way to clean
the intake plenum? Looks like the inside of a flooded coal mine (at
night) in there with a buildup of black stuff perhaps 1/8" thick.
I'm tempted to drive the parts down to the local pressure car wash &
spray them off! But I hate to mess the place up for those who come
behind me...
Thx!
Larry
OilAnalysis Time?
Looking for Weber Parts or Porsche Posters?
www.youroil.net
--------------------------------------------------
From: "OK Don" <okd...@gmail.com>
Sent: Tuesday, February 16, 2010 11:08 PM
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Subject: Re: [MBZ] Fuel delivery valve job
From 14-1310 on the CD - 25nm, or 18.4 lb-ft. No lock-tite needed.
All it
needs is enough torque to seal to the head -
On Tue, Feb 16, 2010 at 9:41 PM, LarryT <l02tur...@comcast.net>
wrote:
Hi Gang -- I have started to prep things so I can rebuild my
delivery
valves - I have the springs, washers and o-rings and started
disassembling
the intake stuff.
One problem - when I started removing the bolts that hold the
intake
manifold to the head I found them to not be very tight - I was
told by
others on the list that the torque should be "20Nm/14-15ft-lbs"
which seems
pretty low to me. I looked at my Data Book but could not find the
torque
for the intake bolts. I looked for 1/2 hour but could not find it.
Can anyone confirm the torque value for the manifold bolts for my
602-962
engine? Also, should I use LockTite on the bolt threads? I'll
look some
more but would appreciate any help.
Thx
LarryT
91 300D 2.5T W124
--
OK Don
Panic! (the national past time).
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com