I have a spare intake but don't remember if those bits are still
attached, I'll take a look later but I won't be able to mail until maybe
Saturday or maybe a week from Saturday.  I'll let you know.

-Max 

-----Original Message-----
From: mercedes-boun...@okiebenz.com
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of Dieselhead
Sent: Thursday, March 11, 2010 8:52 PM
To: mercedes@okiebenz.com
Subject: [MBZ] OM603 Bits needed

Someone took off bits from the engine in my SDL.  I am looking for the 3
metal tabs the are bolted to the intake manifold, and the plastic clips
for the back 3 injection lines clip into them.  There is also a metal
clip that is supposed to bolt under the manifold and holds the back
three lines.  I need that also.

Some genius decided the engine was not supposed to have them, so they 
took off the hardware to stabilize the injection lines.    You might 
get by with that for a while on the old heavy, short lines, but not with
the long, light lines of the OM603

If anyone (Kaleb?) has these around on a spare engine, I sure would like
to have them on my engine.  Send me an email off-list.

TIA
126die...@gmail.com

1987 300SDL

_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com To search list archives
http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to