At last check both 240D and 300D fly wheels were NLA. Perhaps I'll ask again.
Jaime On Tue, Sep 28, 2010 at 1:11 PM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: > Has anyone checked with Rusty to see what the price for a new one is? Part > number is 617 030 00 05 according to the EPC. > > -Max > > -----Original Message----- > From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] > On Behalf Of Jaime Kopchinski > Sent: Tuesday, September 28, 2010 12:51 PM > To: Mercedes Discussion List > Subject: Re: [MBZ] Anyone have a 617 manual flywheel they could measure? > > I've been looking for a manual trans flywheel for a 617 for a while now. If > you find one, let me know! > > Jaime > > On Tue, Sep 28, 2010 at 11:02 AM, Walt Zarnoch <zarnoch...@gmail.com> wrote: >> I'm creating a cad model of the flywheel to aid in making the new >> adapter plate for my truck. >> >> The 616 flywheel is thinner than the 617 one is, so the lip to >> pressure plate measurement would be off a few cm. That's not too big a >> problem though. The bolt face to crank face dim should be the same >> though, since the same bolts are used between the 616 and 617. >> >> Just remembered I can measure off of the crank on the 616 to get the >> bolt circle diameter, there's one down. >> >> I'll scout around on the inner-tubes some more and see if I can find it. >> >> Walt >> >> On Tue, Sep 28, 2010 at 10:48 AM, Rolf <r...@winmutt.com> wrote: >>> Can I ask why (making your own?)? If no one here can answer ask on >>> superturbodiesel.com, someone there is bound to have a 240 flywheel >>> sitting around. I did and sold it to somone. Only have 201/124 stuff now. >>> >>> Those measurements are going to be the same on any of the w123 >>> manuals trans and the manual trans in the Gwagen (om61x powered cars). >>> >>> -Rolf >>> >>> On 09/28/2010 09:26 AM, Walt Zarnoch wrote: >>>> >>>> Hello all, I've got a small favor to ask. >>>> >>>> I'm trying to get the measurements for the manual om617 flywheel,but >>>> I don't care to pull the engine out of the truck it currently >>>> resides in to do it. >>>> I >>>> found a few dimensions in the engine service manual, but the set is >>>> incomplete. >>>> >>>> If anyone has an easily accessible flywheel and a set of verniers, >>>> and feels up to the task, the needed measurements are the thickness >>>> from the crank mating surface to the bolt mating surface, the bolt >>>> circle diameter from center point of bolt holes, and the depth to >>>> the pressure plate mating surface from the face of the lip. >>>> >>>> Much thanks to anyone who helps, >>>> >>>> Walt >>>> _______________________________________ >>>> http://www.okiebenz.com >>>> For new and used parts go to www.okiebenz.com To search list >>>> archives http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>> >>> >>> _______________________________________ >>> http://www.okiebenz.com >>> For new and used parts go to www.okiebenz.com To search list archives >>> http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com To search list archives >> http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: smime.p7s > Type: application/x-pkcs7-signature > Size: 4926 bytes > Desc: not available > URL: > <http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20100928/46d178ac/attachment.bin> > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com