Better be very straight -- if warped, it's not going to seal.
The correct sealant is a black RTV, don't remember which one. Small
amounts only, the pan and block are machined very flat so you won't
need much.
Peter
On Oct 22, 2010, at 9:02 AM, <[email protected]> wrote:
Interesting, I went with RTV because of the discussion surrounding
OK Don's replacement. :) So the consensus is Permatex, at least
with a mostly straight pan (?).
Thanks,
-Tim
-----Original Message-----
From: MG <[email protected]>
Subj: Re: [MBZ] OM603 oil pan breech
Date: Fri Oct 22, 2010 8:49 am
Size: 873 bytes
To: Mercedes Discussion List <[email protected]>
Permatex form-a-gasket #2. Usually in a small can with a brush on
the lid. One will last a good long time. Use rubbing alcohol to
get it off your hands.
Manfred
Date: Thu, 21 Oct 2010 19:04:16 -0500
From: OK Don <[email protected]>
To: Mercedes Discussion List <[email protected]>
Subject: Re: [MBZ] OM603 oil pan breech
Message-ID:
<[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
Corredct! I used that black "never hardens" standard old time
gasket sealer.
Wish I could remember the name ---
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--- message truncated ---
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
