I don't have a nice assortment to select from, so I'll need to go buy something. You think it could be between 4, 5 and 6mm?
Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC ________________________________ From: Mitch Haley <m...@voyager.net> To: Mercedes Discussion List <mercedes@okiebenz.com> Sent: Wed, March 16, 2011 10:52:28 AM Subject: Re: [MBZ] '87 300TD head removal Max Dillon wrote: > Dieselvolk, > > Can anyone provide the specifications for the shop-made slide rail pin > pulling >tool? I think it is supposed to be a bolt 6mm in diameter with a nut and >stack >of washer, but how long, how deep a washer stack, and are the threads 6mm x1.0 >or some other dimension? I wouldn't sweat the details too much (but I've got an assortment of 4, 5, and 6mm bolts laying around already). Just find a bolt that threads in smoothly, stick a washer and a socket over it, make sure it goes in 4 threads before it gets tight, and crank down on it until you meet resistance or it comes out. (you don't want to bottom out on the threads and then keep turning it) If you bottomed out, unscrew it and start over with a longer socket or more washers. Mitch. _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com