Could be a bad solder in the system somewhere. That is one of the areas that
the Japanese are good at and the rest not so.
Had to fix the electro magnetic clutch on a 190E last summer due to bad
soldering.
Hendrik
----- Original Message -----
From: "OK Don" <[EMAIL PROTECTED]>
To: "Mercedes mailing list" <[EMAIL PROTECTED]>
Sent: Saturday, December 03, 2005 1:26 PM
Subject: [MBZ] Flashing red light in the recirculation switch - '90 124
When I left the house to run an errand this evening in the '90 300D
2.5, the led in the recirculation switch started flashing. The ACC
didn't work - it was blowing a little air, and wouldn't turn off.
When I got to my destination, I turned the car off - the light stopped
blinking - then started it again - the light didn't blink and the ACC
worked normally.
It all works normally for two more stops, then home again.
Any idea what was going on?
Has Clay's wagongeist come to visit? How does a pastafarenian do an
exorcism?
--
OK Don, KD5NRO
Norman, OK
'90 300D, '87 300SDL, '81 240D, '78 450SLC
The FSM created the Diesel Benz
http://www.venganza.org/
_______________________________________
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.13.10/189 - Release Date:
30/11/2005
