Yup. It's just enough movement to see detectable needle movement on my cheapie dial gauge. It also seemed to me that the setting was correct when you can just barely detect any movement when you push/pull on the disk.
-----Original Message----- From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Curt Raymond Sent: Monday, July 08, 2013 1:15 PM To: Diesel List Subject: Re: [MBZ] Setting my hubs I believe the spec is 0.01-0.02mm, I use 0.0005 which is between lines on my HF dial indicator. -Curt Date: Mon, 8 Jul 2013 07:53:35 -0400 From: Michael Canfield <slozuk...@gmail.com> To: Mercedes Discussion List <mercedes@okiebenz.com> Subject: Re: [MBZ] Setting my hubs Message-ID: <calhj_1ceth6qaazcyb_zs5+x9kvjf3n_wugdswzfgmx0gec...@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Rich, You better check that spec again........2mm is way too loose. Mike _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com