Purists may not like this suggestion, but what I normally do before
taking any driveline apart is to use a spray paint can and make a line
down the joint from one shaft to the other. If one side has an orange
stripe and the other does not, it is difficult to put it together backwards.
On 26/05/2014 11:17 AM, Scott Ritchey wrote:
I haven't done it either (but need to). The only thing I can add is to
ensure the front and back parts of the shaft go back together in exactly the
same splines as originally assembled or you'll have an imbalance problem.
So marl them unless there is an indexing mark already there. And for all I
know this may not apply to a 140.
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual contributors and as such, those
individuals are responsible for the content of the post. The list owner has no
control over the content of the messages of each contributor.
