There are two sets of plastic bushings. One set at each end of the round rod that connects the shifter to the transmission and another set on the shifter shaft where it pivots fore and aft. With new/good bushings it will be tight and smooth as butter. On the other hand it could be an internal problem (parking pawl) in the transmission.
> -----Original Message----- > From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Peter > Frederick > Sent: Wednesday, July 09, 2014 11:43 PM > To: Mercedes Discussion List > Subject: Re: [MBZ] Car rolls back in "park" > > Shifter linkage bushings have died and fallen out. > > Peter > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > All posts are the result of individual contributors and as such, those > individuals are responsible for the content of the post. The list owner > has no control over the content of the messages of each contributor. _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.