Rich, I've got the blue tooth adapter thing, you can borrow if you like. Max Dillon, Charleston SC On Aug 28, 2014 11:39 AM, "Rich Thomas via Mercedes" <mercedes@okiebenz.com> wrote:
> Well looks I need to spring about $15 and buy one of those chinee readers > then download the app and give it a try. > > What I probably need at this point is the ability to read manifold > pressure (or wherever the baro sensor is) to see if there is an air leak > somewhere and fuel pressure to see if my fuel pump is giving up. I am > going to put on a new fuel filter, which I bought the other day but was too > lazy to put on, and see if that cures the fuel problem. If not a $215 > pump, drain about 25gal of gas, and drop the tank to get at the pump. > > The code it threw was lean fuel condition, which the webertubez says is > most likely the air flow sensor or a fuel problem, but maybe an intake > gasket leak. I'm guessing fuel delivery, 14 years and 200k miles is > probably too much to expect on the pump. > > --R > > > On 8/28/14 11:17 AM, Tim Crone wrote: > >> On Thu, Aug 28, 2014 at 10:17 AM, Rich Thomas via Mercedes < >> mercedes@okiebenz.com <mailto:mercedes@okiebenz.com>> wrote: >> >> I am looking at Torque v. DashCommand. Both apparently require >> buying "sub-apps" for each vehicle or vehicle type or something to >> get all the data streams? I would want to run the app on my 2000 >> Suburban and 96 Chebbie >> >> Torque Pro code lists are all free (at least, all the ones I have seen). >> There are some non-free plugins but those aren't for core reading >> functionality - they are things like recording video and whatnot. I have >> never felt a need to purchase anything beyond the core Torque package. >> >> There is a Ford Truck plugin that I am using with the van - I assume the >> Chevy has something similar. Torque is smart enough to not display codes >> that don't work, unless you tell it to do so. Also, you can add any >> code/PID/etc. that you like - it is pretty easy, I added a few for the >> Escape Hybrid when I had it. >> >> truck. I am trying to figure out what I would need to do that, and >> what the full-up capabilities would cost. Any idea on that? Does >> the Torque pro version cover any vehicle with all the data >> stream? I guess it's only $5 so no big >> >> >> Thus, yes, the Pro version includes all the vehicles, and all public >> codes. The lists aren't completely comprehensive, but they are "pretty >> good" for common vehicle types. >> >> cost. I saw some comment on some forum that the sub-app for >> DashCommand is $10 but not entirely sure. I sent them an email to >> find out. >> >> >> I have had good luck contacting the developer of Torque, he helped me >> with the Escape. However the forum is probably a better place to start. >> You could probably also check the forum for compatibility with any >> particular Bluetooth reader. >> >> http://torque-bhp.com/obdforum/obd2/wpforumaction/viewforum/f/1.0 >> >> Best, >> Tim >> > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > All posts are the result of individual contributors and as such, those > individuals are responsible for the content of the post. The list owner > has no control over the content of the messages of each contributor. > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.
