Remember that there is no differential in the snowblower, both wheels turn together. Turning around requires macho snowblower dragging strength and skill. My snowblower has a pin you can remove to disable drive (effectively giving a differential) on one wheel, its useless one wheel alone pushes the snowblower either not at all or at an angle... -Curt From: Max Dillon via Mercedes <mercedes@okiebenz.com> To: Craig <diese...@pisquared.net>; Mercedes Discussion List <mercedes@okiebenz.com> Sent: Wednesday, February 4, 2015 1:13 AM Subject: Re: [MBZ] Snowmaggeddon Part Deux That was also my question. When mowing the lawn, I try to make circles instead of going back and forth. One can cover more ground more quickly that way. Circles would be too hard with a snow blower, but back and forth, turning at each end, would seem to be more efficient. -- Max Dillon Charleston, SC
On February 4, 2015 12:03:42 AM EST, Craig via Mercedes <mercedes@okiebenz.com> wrote: > >Why all the backward movement when you are blowing to the side? >Why not turn around, turn the spout, and keep on going? > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor. _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.