I can scout the part next time I am at a PnP. clay
On Mar 13, 2016, at 1:58 PM, WILTON via Mercedes wrote: > > Well, yesterday was a sad, bad day here in sunny Eastern NC. I can no longer > refer to my 29½-year-old '87 300D (144 kmi) as "showroom" or nearly > "showroom." Though it still has no significant dings, scratches or dents, > and is badly in need of a good "Marthaing," yesterday I discovered that a > section ('bout 6" X 8") of the plastic, inner fender immediately behind left > front wheel has broken loose from the mounting point at lower, front corner > of the rocker panel and is hanging by a place only 1" long at end of a crack > along top edge of the piece. Lucky to have not lost the piece. I "doctored" > (glued it in place) with black silicone gooped between the piece and forward > end of rocker panel and along the crack. 'Holding it in place for day or so > with blue painter's tape. Reminds me of baling-wire fixes of "days-of-yore." > 'Just thought of another possible way to hold it together - "sew" the crack > together with loops of small, thin tiewraps (zipties). I'll watch it and > decide if it needs more doctoring. If I were able, I scout salvage yard for > replacement inner fender. > > Wilton > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com