The service manual (07.1-145) actually covers this pretty well, but it's something I never adjusted on my cars. If you can't access your books, the crappy scanned version is at:
https://www.startekinfo.com/StarTek/outside/12253/program/Engine/617/07_1-14 5.pdf Scott > -----Original Message----- > From: Mercedes [mailto:cedes-boun...@okiebenz.com] On Behalf Of > Curley McLain via Mercedes > Sent: Tuesday, March 28, 2017 6:06 PM > To: Mercedes Discussion List <mercedes@okiebenz.com> > Cc: Curley McLain <126die...@gmail.com> > Subject: Re: [MBZ] Spring Stretch Results 123.123.12 > > 1981 240D 123.123 > > > Since the discussion of the pressure relief valve on the IP, I figured I should > check that, guessing that it is collapsed. It was 20 mm. > Stretched it to 27mm (1 1/8") and put it back. Idle is better. It seems like > acceleration may be better too. I didn't take it out and drive it. It seemed to > rev faster. > > Plus one. Thank you to whoever it was that brought up the topic and > also to who posted the 27mm dimension. Jogged my memory and saved me > trying to look it up. My books are packed away somewhere, so that is not easy > right now. > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
