Hi Ya'll,
When I get to the point when I'm ready to buy a replacement bearing kit,
which brand is the highest quality? I've seen FAG, Aftermarket (there's
a creative name), and others. Have never heard of FAG, or most others.
TIA!
LarryT
On 07/26/2018 8:48 PM, Mitch Haley via Mercedes wrote:
On July 26, 2018 at 8:33 PM Peter Frederick via Mercedes
<mercedes@okiebenz.com> wrote:
The tie rod has a standard tie rod end that you will need to pop loose with a
pickle fork or a lever type tool (which I prefer).
The other links unbolt, but the rubber is part of the spring action and the
wheel carrier must be at ride height when you tighten the bolts back up. No
need to loosen the other end unless the rubber is shot.
For some reason I was thinking it was similar to the W163, which didn't involve
any rubber bushed joints to remove the axle. Oops.
Mitch.
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com