It is a facelift w124. Single lens and gasket.
>
> 124 820 8959 is the housing. Lenses look similar to bosch that are on the
> car, but a few more fresnel elements etc.
>
> I guess the facelift cars would have US spec and euro spec lenses. But are
> the housings different? I assumed the housings were all the same for
> facelift cars on both sides of the ocean.
>
> Thanks for any input,
> Karl
>
> On Sat, Dec 22, 2018, 11:54 AM Curley McLain via Mercedes <
> mercedes@okiebenz.com wrote:
>
>> are these for USA lights or yuro lights?   I thought you bought the
>> whole yuro unit, but your description sounds like you got just the lens
>> for the USA headlight.
>>
>> If USA, you should buy the lens and reflector together, or buy the whole
>> yuro headlight units.
>>
>> Karl Wittnebel via Mercedes wrote on 12/22/18 1:27 PM:
>> >> OK what's the consensus on buying new headlight housings vs. just the
>> >> lenses and using used housings/reflectors?
>> >
>> > A few days ago a package shows up with new Hella lenses from Belarus or
>> > something like that (not sure - I tried the Latvian guys but never got
>> the
>> > money wired, so I reordered from another former Russian republic).  So
>> I go
>> > out today to finally replace my old lenses only to discover the tabs
>> > holding the lens in place are half gone, 2/4 broken off. Drat!
>> >
>> > Then I take a look at the reflectors and they are pretty shiny on the
>> > inside but the little bucket around the bulb is coated in white fluff
>> that
>> > is probably full of mercury or asbestos or some other toxic stuff on
>> both
>> > the inside and the outside of the bucket, and the reflector itself
>> seems to
>> > have lost its shine on the back side (front side seems OK but is very
>> dusty
>> > with the same white fluff). And I don't want to mess up the reflective
>> > surface trying to remove the white fluffy dust stuff, though I would do
>> it
>> > with some reading I suppose.
>> >
>> > So it has me thinking I should have ordered the entire lights, as I
>> would
>> > have new housing tabs and reflectors as well as new lenses and turn
>> signals!
>> >
>> > What is the collective wisdom on this? Clean the old ones and use
>> aircraft
>> > wire to hold the lenses on, buy used housings on eBay and risk tab
>> failure,
>> > or buy new from bananazon or eBay?
>> >
>> > My bulbs are also bad so I may pick up a set of cheapo LEDs and see how
>> > they look. The OSRAMs have a little separate filament with a shade so it
>> > only shines upward; this is inside the bulb. I am suspicious that the
>> LED
>> > guys have not fully sorted their bulbs to the same degree, but I will
>> check.
>> >
>> > Karl
>> > _______________________________________
>> > http://www.okiebenz.com
>> >
>> > To search list archives http://www.okiebenz.com/archive/
>> >
>> > To Unsubscribe or change delivery options go to:
>> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> >
>>
>>
>> _______________________________________
>> http://www.okiebenz.com
>>
>> To search list archives http://www.okiebenz.com/archive/
>>
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>
>>
_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to