did that, the stuff seems to be all goobered up inside the housing where
the main line goes in then it branches out somehow to the little squirt
holes. It doesn't look like it will come apart; hence, the soaking.
-_FT
On 10/28/19 7:28 PM, Curley McLain via Mercedes wrote:
A pin? or small dia SS (tempered) wire
Floyd Thursby via Mercedes wrote on 10/28/19 6:01 PM:
My windshield squirters weren't on the $600E320 so I pulled of the
connector and the motor was getting voltage, put it back and lo the
motor began working but nothing coming out of the nozzles. Tried
cleaning the little holes, still nothing. Took of the squirter
assembly (it just snaps into the hose and the hood, easy removal) and
it was completely goobered up inside, it doesn't come apart near as I
tell so I have it soaking in some vinegar solution to see if that
loosens up the dried up fluid in there. Not sure what else might go
at it. If that doesn't work I'll get a syringe with something else
and try I guess. Any ideas?
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
--
--FT
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
