Same here, but almost always under the diff or under the front cross piece, so I get the entire axle off the ground. ------------- Max Charleston SC
On Thu, Feb 11, 2021 at 12:42 PM Buggered Benzmail via Mercedes < mercedes@okiebenz.com> wrote: > I use a floor jack either under the diff or engine cross frame or jack > points depending on what I’m doing > > --FT > Sent from iPhone > > > On Feb 11, 2021, at 12:08 PM, Randy Bennell via Mercedes < > mercedes@okiebenz.com> wrote: > > > > Do you use the factory jack from the trunk, or do you use a floor jack > and just jack under the jacking point holes in the rocker panels? > > > > I have been wondering about making a small hydraulic floor jack into a > jack for the purpose by welding a bolt or other round metal pin onto the > top of the jack cradle. > > > > I think the pin might need to be able to tilt a bit as the jack lifted > the car but apart from that, it should be easy enough to do. > > > > Opinions? > > > > Randy > > > > > > _______________________________________ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com