Hmmm, ok?

Sent from my iPhone

> On Feb 11, 2021, at 5:23 PM, Allan Streib via Mercedes 
> <mercedes@okiebenz.com> wrote:
> 
> If there's a Harbor Freight nearby pick up one of these.
> 
> https://www.harborfreight.com/cm200a-200a-fork-style-clamp-meter-64016.html
> 
> I saw a review on YouTube compare to a similar Fluke. Had slower
> response time and build quality was not as robust, but was just as
> accurate and thought to be a good deal for the casual user.
> 
> Allan
> 
> Kaleb Striplin via Mercedes <mercedes@okiebenz.com> writes:
> 
>> Think I should just replace it or swap positions first? I am afraid if it is 
>> the breaker and I go thru the hassle of moving it now the problem will be 
>> with the outside unit or something. There are 3 60 amp breakers and all 
>> involve the heat pump. One is aux heat, one is outside unit and one is 
>> inside unit. I think I will just head to town and get one real quick. 
>> 
>> Sent from my iPhone
>> 
>>>> On Feb 11, 2021, at 5:04 PM, Allan Streib via Mercedes 
>>>> <mercedes@okiebenz.com> wrote:
>>> 
>>> New breaker would be my first try. They do get weak. If the problem
>>> persists then diagnose further.
>>> 
>>> Kaleb Striplin via Mercedes <mercedes@okiebenz.com> writes:
>>> 
>>>> It is in the 20's today and will be into the single digits this week.  
>>>> One thing I have noticed for quite a while is every now and then the 
>>>> breaker for the aux heat will be tripped.  I usually just reset it and 
>>>> its fine but the aux heat does not have to run much as it has not been 
>>>> that cold.  When we got back I had it set for 65 and the breaker was 
>>>> tripped again.  I set the temp back to 68 and checked later and the 
>>>> breaker was tripped again.  I reset it and just now checked it and temp 
>>>> is now up to 68 and the breaker tripped a 3rd time.  In other words, I 
>>>> need to get this addressed.  What could be the cause?  Thought about 
>>>> swapping out the breaker in case it was getting weak but what else could 
>>>> be the cause?  Is it likely something is shorting in the heat strips 
>>>> itself?  Not sure if I should investigate and resolve or just turn in a 
>>>> service request to the home warranty company.
>>> 
>>> _______________________________________
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> _______________________________________
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> -- 
> Allan Streib
> Indiana University
> Luddy School of Informatics, Computing, and Engineering
> Digital Science Center | Intelligent Systems Engineering | FutureSystems
> 
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to