However long this job takes you, you will be more than amply rewarded when you drive along at night and see the multicolored lights in the center of the dash. Truly glorious.
On Sat, Nov 12, 2022, 9:01 PM Jaime Kopchinski via Mercedes < mercedes@okiebenz.com> wrote: > I'm glad my instructions are useful! > > As for the clips, there are two... the C shaped clips that hold the cable > housing to the lever assembly can be removed with your fingers or a flat > head screwdriver. They will go flying so be careful. > > The second clips are the ones that hold the cables to the levers - the > castelled washers, can just be pried off with a small screw driver. > They'll also go flying if you're not careful. > > The outer cables for the lower levers are different - you need to access a > philips head screw from above in order to release the cables. I assume I > talked about this in the instructions on my site (which I wrote 20 years > ago, so I don't remember). > > As for any parts that might go flying, you can order them from the classic > center. Its best a send a photo of what you need. There are many many > different variants of these levers and cables and I'm always surprised when > I find another version. > > I suspect a new blower motor is in your future. The one in my 4.5 recently > died and I need to replace it also. Its not as terrible of a job as the > internet would lead you to believe. There are more difficult jobs, for > sure. > > Good luck > Jaime > > > > On Sat, Nov 12, 2022 at 7:35 PM David Bruckmann via Mercedes < > mercedes@okiebenz.com> wrote: > > > I'm finally addressing the ventilation system on my W108 280SEL 4.5. > > > > Months ago the fan stopped, with resultant stream of smoke. Today I > removed > > the cowl and cabin filters (ordered new ones from MB) and reached in to > > turn the motor. It is VERY stiff, but less so now. Drenched it in ATF and > > will let it sit. > > > > While I'm at it, years ago I ordered new control levers and this seems > like > > the right time to install them so that I can actually regulate the fan > > speed, for example. > > > > So I followed Jaime's excellent instructions and I am now at the > > "disconnecting" stage. Is there any advice apart from not losing clips > and > > so on? I'm guessing the castellated washers or whatever they're called > that > > grip the shaft are simply something one squeezes to release, or am I in > for > > a struggle? > > > > Thanks in advance, > > > > D. > > _______________________________________ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > > -- > Jaime Kopchinski > http://www.jaimekop.com/ > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
