It’s a hard line and kinda bendy to fit around the frame with the fittings 
welded on the ends or something. It’s easy to sit at my desk and click buy in 
10min rather than chasing all over creation trying to find a part or get one 
made. I’ve been in no rush so not like it was critical to get the crops in or 
something. 

There is a semi “local” stealer that might or might not have the part but it’s 
a good 30min drive and a gallon (or more) of gas each way plus their prices are 
usurious like the local Benz stealer. So all in all I just order stuff. 

--FT
Sent from iFōn

> On Dec 29, 2022, at 5:27 PM, Allan Streib via Mercedes 
> <mercedes@okiebenz.com> wrote:
> 
> Those established tractor makers seem to have good parts service in my 
> experience. I have had no trouble getting replacement mower blades and 
> various belts for my decades-old Cub Cadet. Haven't had the need for anything 
> else yet.
> 
> Somewhat surprising that the part was made wrong. For something like that, 
> maybe a local hydraulic hose maker would do just as well?
> 
> 
>> On Thu, Dec 29, 2022, at 17:17, Buggered Benzmail via Mercedes wrote:
>> I have a spewing hydraulic line on my little kubota tractor. I replaced 
>> one but that wasn’t the spewing part so I ordered the other 2, might as 
>> well replace them all. I went to put the second one on which I now 
>> think is the one spewing. Slid in OK but the fittings wouldn’t work. 
>> One end is a pipe fitting for a hydraulic nipple, the other end is a 
>> tube fitting to mate up to another line that goes somewhere. This new 
>> part has the fittings on the wrong ends, swapped around. WTF?
>> 
>> I verified on the parts diagram on their website (which is almost as 
>> obscure to find as parts in the Benz EPC) I had ordered the proper part 
>> then called the vendor. She verified it was the right part then wanted 
>> pics of the new part and the one I pulled off so I sent some to her. 
>> She sent the pics to Kubota then called me back a little while later 
>> and said it was the right part but had been manufactured backwards. Go 
>> figure. Anyway she’s sent me a correct part this afternoon and a return 
>> label for the bassackards one. 
>> 
>> Weird. But good customer service. 
>> 
>> --FT
>> Sent from iFōn
>> _______________________________________
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to