I always just use an open end wrench.
OK Don wrote:
Do you have a crow's foot type socket to torque the injection line
fittings, or just pull with an open end wrench?
Have any spare (good) 603 injector lines?
On 9/13/06, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
I have had a couple of cars where those lines cracked right at the
fitting, check that. In fact, I just had to replace on of the lines on
my new SDL because it started leaking at the pump. Was not cracked, but
for some reason, would not seal.
--
Kaleb C. Striplin/Claremore, OK
91 300D 2.5 Turbo, 90 420SEL, 89 560SEL, 87 420SEL,
87 300SDL, 87 300SDL #2, 86 300SDL, 84 380SE, 84 190D 2.2,
84 190D 2.2 #2, 81 240D, 76 240D, 76 300D, 72 250C, 69 250
http://www.striplin.net
