One more time, hasn't anybody out there done this job before? If anyone out there has done this, I sure would appreciate their comments.
I am replacing the glass in the quarter window. There is a large "L" shape metal frame that the window rubber seal needs to be attached to, which in turn is attached to the vehicle by pulling the rubber lip over the edge of the window cut out and then a couple of sheet metal screws hold the whole thing to the body The window rubber seal has a 45 degree angled projection that runs half way around the seal, that needs to be inserted (somehow) into a channel on the metal frame. I have tried soapy water, silicone grease, light tapping with a rubber mallet and lots of hand pressure trying to coax this seal into the channel. For more hours than I care to admit Any ideas from the group will be appreciated. Marshall in Feenix where diesel is now selling for $3.55 _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
