On Mon, Apr 14, 2014 at 9:40 AM, Ingmar Sittl <[email protected]> wrote: > Hi, > > I am trying to switch the i.mx6 Linux BSPs we use from the old LTIB-based > setup to Yocto, but run into problems getting the display to work. > > I've built fsl-image-test from dora (with X11 disabled to get a > framebuffer-based OpenVG/OpenGLES setup) and installed the resulting image > to an SD card. Unfortunately I don't seem to be able to configure the system > so that I get output on the Hannstar display connected to LVDS0. I've tried > the configuration settings recommended by others in the forum > (video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb1:off fbmem=10M > vmalloc=400M no_console_suspend), but no luck.
Do you see *anything*? the sequence of "things to be shown": (in a fsl-image-test case) u-boot splash -> 4 tux -> yocto project progress bar -> blank -> console > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194560 > Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw > video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb1:off fbmem=10M > vmalloc=400M noconsole_suspend What's the consequence of "noconsole_suspend"? besides that, please, consider the "rev 1.1" commend from Fabio. Daiane -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
