Hello Dirk, Thank you very much for the detailed steps, it will be of great help. I have still to wait for access to the Kontron customer support section, will be able to test it out after that.
Best regards, Andreas > 8 jul 2015 kl. 18:27 skrev Dirk Berar <[email protected]>: > > Hi Andreas, > > I asked Kontron to contribute to the community. Unfortunately they > didn't until today. Poor. > > I'll try to give you a little help from my documentation. Do the > following from scratch: > > # to install the repo tool (and a bunch of other software) under Ubuntu > # 12.04 or 14.04 > $ sudo apt-get install phablet-tools > > $ mkdir fsl-community-bsp; cd fsl-community-bsp > $ repo init -u https://github.com/Freescale/fslcommunity-bsp-platform \ > -b daisy > > # The Kontron BSP is based on daisy. I also tried dizzy successfully. > > # pull the sources > $ repo sync > > # apply the Kontron Patch for SMARC-sAMX6i > $ cd sources/meta-fsl-arm-extra > $ patch -p1 < /path/to/smarc-samx6i-support-R01.00.diff > > # initialise Yocto Build Environment > $ cd ~/fsl-community-bsp > $ MACHINE=smarc-samx6i . ./setup-environment [build-directory] > > # start Yocto Build > $ bitbake core-image-full-cmdline > > I also tried "core-image-sato" successfully. Interesting, if you have > connected a LVDS display. > > To flash the Yocto image to the board, use the live media of the Linaro > based BSP (Linux_BSP_SMX6 1.2): > http://emdcustomersection.kontron.com/wp-content/plugins/download-monitor/download.php?id=1164 > > Good luck > Dirk > > Otavio Salvador schrieb: >> On Wed, Jul 8, 2015 at 11:00 AM, Andreas Enbacka >> <[email protected]> wrote: >>> I am currently trying to build a Yocto image for the SMARC-sAMX6i (SMARC >>> evaluation kit from Kontron), and have some questions regarding it. First, >>> what reference image recipe is suitable for the SMARC-sAMX6i eval kit? And >>> second, what is the optimal way to deploy / flash the Yocto image to the >>> board? Any information would be greately appreciated. >> >> Kontron is not supported by the FSL Community BSP so the right place >> to ask for help is their support channel. Plus, pester them to add >> proper support to the community so your turn-key experience will be >> nicer next time ;) >> -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
