Hello Andreas and Dirk, Nice to see other SMARC-sAMX6i users. I have also tried to ask Kontron official support for FSL Community BSP but without luck yet. I hope if there is enough of us so we may get it someday.
As I have understood there was some intention to add the FSL Community BSP support last December: https://lists.yoctoproject.org/pipermail/meta-freescale/2014-December/011842.html. But when Otavio asked for some more things like support for master branch and U-boot recipe they didn't continue. They did some experiments on March with newer meta-fsl-arm master, but for some reason they haven't released nothing more than the patch for daisy. Maybe the reason for that was this GPU performance gap between master(current fido) and dizzy branches: https://lists.yoctoproject.org/pipermail/meta-freescale/2015-March/013135.html. I have done my own experiment to rebase their daisy patch on top of fido and 3.10.53 kernel. It seems to work pretty well, just waiting if Kontron comes up with official patch someday. When you get access to their EMD Customer section you will find that PDF documentation provided with the patch is pretty good. I have found using NFS boot the easiest way to deploy the rootfs and device tree to eMMC. It is also well documented by Kontron (chapter 7.5). Also they have great support (must go through your HW supplier) for their own U-boot fork if you need to change something there. Good luck! BR, Heikki Sarkanen ________________________________________ From: [email protected] <[email protected]> on behalf of Andreas Enbacka <[email protected]> Sent: 08 July 2015 18:53 To: Dirk Berar Cc: [email protected]; Otavio Salvador Subject: Re: [meta-freescale] Image building and deployment to SMARC-sAMX6i Hello Dirk, Thank you very much for the detailed steps, it will be of great help. I have still to wait for access to the Kontron customer support section, will be able to test it out after that. Best regards, Andreas > 8 jul 2015 kl. 18:27 skrev Dirk Berar <[email protected]>: > > Hi Andreas, > > I asked Kontron to contribute to the community. Unfortunately they > didn't until today. Poor. > > I'll try to give you a little help from my documentation. Do the > following from scratch: > > # to install the repo tool (and a bunch of other software) under Ubuntu > # 12.04 or 14.04 > $ sudo apt-get install phablet-tools > > $ mkdir fsl-community-bsp; cd fsl-community-bsp > $ repo init -u https://github.com/Freescale/fslcommunity-bsp-platform \ > -b daisy > > # The Kontron BSP is based on daisy. I also tried dizzy successfully. > > # pull the sources > $ repo sync > > # apply the Kontron Patch for SMARC-sAMX6i > $ cd sources/meta-fsl-arm-extra > $ patch -p1 < /path/to/smarc-samx6i-support-R01.00.diff > > # initialise Yocto Build Environment > $ cd ~/fsl-community-bsp > $ MACHINE=smarc-samx6i . ./setup-environment [build-directory] > > # start Yocto Build > $ bitbake core-image-full-cmdline > > I also tried "core-image-sato" successfully. Interesting, if you have > connected a LVDS display. > > To flash the Yocto image to the board, use the live media of the Linaro > based BSP (Linux_BSP_SMX6 1.2): > http://emdcustomersection.kontron.com/wp-content/plugins/download-monitor/download.php?id=1164 > > Good luck > Dirk > > Otavio Salvador schrieb: >> On Wed, Jul 8, 2015 at 11:00 AM, Andreas Enbacka >> <[email protected]> wrote: >>> I am currently trying to build a Yocto image for the SMARC-sAMX6i (SMARC >>> evaluation kit from Kontron), and have some questions regarding it. First, >>> what reference image recipe is suitable for the SMARC-sAMX6i eval kit? And >>> second, what is the optimal way to deploy / flash the Yocto image to the >>> board? Any information would be greately appreciated. >> >> Kontron is not supported by the FSL Community BSP so the right place >> to ask for help is their support channel. Plus, pester them to add >> proper support to the community so your turn-key experience will be >> nicer next time ;) >> -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
