Ok.. I got where "oe_runmake" function is, but still couldn't zero-in on the problem..!!
Any suggestions on how to proceed.? --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 --------------------------------- On Wed, Jun 26, 2013 at 9:28 AM, Sudhangathan B S <[email protected]>wrote: > On my way to install 2.6.32 kernel for the Beagle board image. I need this > kernel to work with the leopard imaging/aptina camera module/sensors. I'm > encountering this "oe_runmake failed" issue. I have strong feeling it is > Yocto or the meta-ti layers, which is not set properly. On the web i got > related issues, but they are too old, and were related to OE. > > I'm using danny branch. I had downloaded meta-ti, openembedded-core, and > meta-oe as .zip files meant for danny branch. Thanks to Denys D@ti for > help. I integrated meta-ti with yocto, and also built the image with the > default 3.2 kernel, and further with 2.6.37 kernel too, successfully. > > I have also included partial terminal output below.! > > These are a few lines from > /home/asahota/danny-try/danny-8.0/meta-ti/conf/machine/beagleboard.conf > *******START > #@TYPE: Machine > #@NAME: Beagleboard machine > #@DESCRIPTION: Machine configuration for the http://beagleboard.org/board > > require conf/machine/include/omap3.inc > > # Only has DVI connector for external screen > GUI_MACHINE_CLASS = "bigscreen" > > #PREFERRED_PROVIDER_virtual/kernel = "linux-mainline" > PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp" <---- > change > PREFERRED_VERSION_linux-omap-psp = "2.6.32" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard" > PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard" > > IMAGE_FSTYPES += "tar.gz ubi" > EXTRA_IMAGECMD_jffs2 = "-lnp" > > SERIAL_CONSOLE = "115200 ttyO2" > > UBOOT_MACHINE = "omap3_beagle_config" > *******END > > > These are the FIRST few lines of my terminal output, for the command > bitbake core-image-sato > *******START > WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been validated > with this version of the build system; you may possibly experience > unexpected failures. It is recommended that you use a tested distribution. > Loading cache: 100% > |###################################################################################################################################| > ETA: 00:00:00 > Loaded 1210 entries from dependency cache. > > Build Configuration: > BB_VERSION = "1.16.0" > TARGET_ARCH = "arm" > TARGET_OS = "linux-gnueabi" > MACHINE = "beagleboard" > DISTRO = "poky" > DISTRO_VERSION = "1.3" > TUNE_FEATURES = "armv7a vfp neon cortexa8" > TARGET_FPU = "vfp-neon" > meta > meta-yocto > meta-ti > meta-yocto-bsp = "<unknown>:<unknown>" > > NOTE: Resolving any missing task queue dependencies > NOTE: Preparing runqueue > NOTE: Executing SetScene Tasks > *******END > > > These are the LAST few lines of my terminal output, for the command > bitbake -vvv core-image-sato > *******START > | include/linux/pagemap.h: In function 'fault_in_pages_readable': > | include/linux/pagemap.h:413:16: warning: variable 'c' set but not used > [-Wunused-but-set-variable] > | LD fs/ubifs/ubifs.o > | LD fs/ubifs/built-in.o > | LD fs/built-in.o > | ERROR: oe_runmake failed > | ERROR: Function failed: do_compileconfigs (see > /home/asahota/danny-try/danny-8.0/build/tmp/work/beagleboard-poky-linux-gnueabi/linux-omap-psp-2.6.32-r0/temp/log.do_compileconfigs.28440 > for further information) > ERROR: Task 805 > (/home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/ > linux-omap-psp_2.6.32.bb, do_compileconfigs) failed with exit code '1' > NOTE: Tasks Summary: Attempted 5104 tasks of which 5097 didn't need to be > rerun and 1 failed. > No currently running tasks (5104 of 5135) > > Summary: 1 task failed: > /home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/ > linux-omap-psp_2.6.32.bb, do_compileconfigs > Summary: There was 1 WARNING message shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > *****END > > I spent a lot of time tracing the error in the YP folders and files. It > was somewhere near kernel_do_configure. But I couldn't get where > "oe_runmake" is. Couldn't continue debugging. > > --------------------------------- > Sudhangathan BS > Ph:(+91) 9731-905-205 > --------------------------------- >
_______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
