Hi Manjukumar, On 11/12/18 17:21, Manjukumar Harthikote Matha wrote: > Hi Luca, > >> -----Original Message----- >> From: Luca Ceresoli [mailto:l...@lucaceresoli.net] >> Sent: Tuesday, December 11, 2018 8:15 AM >> To: Manjukumar Harthikote Matha <manju...@xilinx.com>; Alejandro Enedino >> Hernandez Samaniego <aleja...@xilinx.com>; meta-xilinx@yoctoproject.org >> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe >> >> Hi Manjukumar, >> >> On 11/12/18 17:07, Manjukumar Harthikote Matha wrote: >>> Hi Luca, >>> >>>> -----Original Message----- >>>> From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx- >>>> boun...@yoctoproject.org] On Behalf Of Luca Ceresoli >>>> Sent: Tuesday, December 11, 2018 7:45 AM >>>> To: Alejandro Enedino Hernandez Samaniego <aleja...@xilinx.com>; >>>> meta- xil...@yoctoproject.org >>>> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port >>>> pmu-firmware recipe >>>> >>>> Hi Alejandro, >>>> >>>> On 06/12/18 22:56, Alejandro Enedino Hernandez Samaniego wrote: >>>>> This patch ports the pmu-firmware recipe from meta-xilinx-bsp to be >>>>> used with the standalone/baremetal toolchain and also upgrades it to >>>>> the latest release at this point. >>>>> >>>>> The recipe was trimmed down, and a few changes had to be made to >>>>> make it compatible with the baremetal layer, DEPENDS, pass include >>>>> dir, license and such. >>>>> >>>>> Signed-off-by: Alejandro Enedino Hernandez Samaniego >>>>> <aleja...@xilinx.com> >>>>> Signed-off-by: Manjukumar Matha >>>>> <manjukumar.harthikote-ma...@xilinx.com> >>>> >>>> I tried to test your entire patch series but with bad luck. Well, >>>> indeed I tested the patches from the github meta-xilinx repo up to >>>> [0], not sure whether the repo is more up to date than the patches here. >>>> >>>> The first issue is that xilinx-standalone is compatible with thud, >>>> but on the mentioned commit (as well as on master) the >>>> mete-xilinx-bsp layer is compatible with sumo only. I solved by >>>> cherry-picking [1]. >>>> >>>> Then I followed the instructions in README.md and 'bitbake newlib' ran >> successfully. >>>> But 'bitbake pmu-firmware' gives: >>>> >>>> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift >>>> -mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul >>>> -mxl-soft-div -- >>>> sysroot=/home/ceresoli/temp/prova-thud- >>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >>>> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot >>>> -o executable.elf pm_master.o pm_api.o xpfw_error_manager.o >>>> xpfw_restart.o pm_config.o xpfw_mod_legacy.o pm_requirement.o >>>> pm_node_reset.o pm_core.o pm_system.o pm_common.o xpfw_xpu.o >>>> pm_gic_proxy.o xpfw_aib.o xpfw_events.o pm_binding.o >>>> pm_mmio_access.o xpfw_scheduler.o pm_slave.o xpfw_mod_pm.o >>>> pm_ddr.o pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o >>>> pm_usb.o pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o >>>> xpfw_mod_wdt.o pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o >>>> idle_hooks.o xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o >>>> xpfw_mod_dap.o xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o >>>> xpfw_module.o pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o >>>> pm_gpp.o pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o >>>> pm_notifier.o xpfw_start.o - MMD -MP -Wl,--build-id=none >>>> -I/home/ceresoli/temp/prova-thud- >>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >>>> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot/usr/include >>>> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group >>>> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxil,-lgcc,-lc,--end-group >>>> -nostartfiles -Wl,--gc-sections >>>> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib >>>> -Tlscript.ld >>>> lto1: fatal error: multiple prevailing defs for 'XUsbPsu_DisableIntr' >>>> compilation terminated. >>>> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit >>>> status compilation terminated. >>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee >>>> l-v9.2-bs- >>>> cmp-xilinx-elf/pmu-firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-s >>>> ysroot- >>>> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil >>>> inx- >>>> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >>>> error: lto-wrapper failed >>>> collect2: error: ld returned 1 exit status >>>> Makefile:28: recipe for target 'executable.elf' failed >>>> make: *** [executable.elf] Error 1 >>>> >>>> I then tried with current master-next [2] and got: >>>> >>>> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift >>>> -mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul >>>> -mxl-soft-div -- >>>> sysroot=/home/ceresoli/temp/prova-thud- >>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >>>> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot >>>> -o executable.elf pm_master.o xpfw_error_manager.o xpfw_restart.o >>>> pm_notifier.o xpfw_mod_legacy.o pm_requirement.o pm_node_reset.o >>>> pm_core.o pm_system.o pm_config.o xpfw_xpu.o pm_gic_proxy.o >>>> xpfw_aib.o xpfw_events.o pm_binding.o pm_mmio_access.o >>>> xpfw_scheduler.o pm_slave.o pm_pinctrl.o xpfw_mod_pm.o pm_ddr.o >>>> pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o pm_usb.o >>>> pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o xpfw_mod_wdt.o >>>> pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o idle_hooks.o >>>> xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o xpfw_mod_dap.o >>>> xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o xpfw_module.o >>>> pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o pm_gpp.o >>>> pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o xpfw_start.o -MMD >>>> -MP - Wl,--build-id=none -I/home/ceresoli/temp/prova-thud- >>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >>>> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot/usr/include >>>> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group >>>> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxilskey,-lxil,-lgcc,-lc,--e >>>> nd-group -nostartfiles -Wl,--gc-sections >>>> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib >>>> -Tlscript.ld >>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee >>>> l-v9.2-bs- >>>> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s >>>> ysroot- >>>> native/usr/bin/microblazeel-xilinx-elf/../../lib/microblazeel-xilinx- >>>> elf/gcc/../../../libexec/microblazeel-xilinx-elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >>>> cannot open linker script file xilinx.ld: No such file or directory >>>> collect2: error: ld returned 1 exit status >>>> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit >>>> status compilation terminated. >>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee >>>> l-v9.2-bs- >>>> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s >>>> ysroot- >>>> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil >>>> inx- >>>> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >>>> error: lto-wrapper failed >>>> collect2: error: ld returned 1 exit status >>>> Makefile:28: recipe for target 'executable.elf' failed >>>> >>>> Am I doing something wrong? >>> >>> I tried replicating the issue but I am unable to do so. >>> Do you have pmu-firmware in a different tmp work directory? >>> >>> I have the following in my local.conf >>> MACHINE="zynqmp-pmu" >>> DISTRO="xilinx-standalone" >>> GCCVERSION="7.%" >>> TMPDIR="${TOPDIR}/pmutmp" >>> >>> And run as bitbake pmu-firmware >> >> I'm not trying the multiconfig setup yet. I'm trying to set up the >> standalone layer as >> per its README.md and get a pmufw binary out of that. >> > > This is not multiconfig, just regular build. Maybe GCCVERSION="7.%" is > missing in your setup, we should add it to MACHINE and README as well
Good catch! Adding GCCVERSION="7.%" to conf/local.conf pmu-firmware builds. Thanks for the very fast reply! -- Luca -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx
