Hey Luca,
On 12/11/2018 08:33 AM, Luca Ceresoli wrote:
Hi Manjukumar,
On 11/12/18 17:21, Manjukumar Harthikote Matha wrote:
Hi Luca,
-----Original Message-----
From: Luca Ceresoli [mailto:l...@lucaceresoli.net]
Sent: Tuesday, December 11, 2018 8:15 AM
To: Manjukumar Harthikote Matha <manju...@xilinx.com>; Alejandro Enedino
Hernandez Samaniego <aleja...@xilinx.com>; meta-xilinx@yoctoproject.org
Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe
Hi Manjukumar,
On 11/12/18 17:07, Manjukumar Harthikote Matha wrote:
Hi Luca,
-----Original Message-----
From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx-
boun...@yoctoproject.org] On Behalf Of Luca Ceresoli
Sent: Tuesday, December 11, 2018 7:45 AM
To: Alejandro Enedino Hernandez Samaniego <aleja...@xilinx.com>;
meta- xil...@yoctoproject.org
Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port
pmu-firmware recipe
Hi Alejandro,
On 06/12/18 22:56, Alejandro Enedino Hernandez Samaniego wrote:
This patch ports the pmu-firmware recipe from meta-xilinx-bsp to be
used with the standalone/baremetal toolchain and also upgrades it to
the latest release at this point.
The recipe was trimmed down, and a few changes had to be made to
make it compatible with the baremetal layer, DEPENDS, pass include
dir, license and such.
Signed-off-by: Alejandro Enedino Hernandez Samaniego
<aleja...@xilinx.com>
Signed-off-by: Manjukumar Matha
<manjukumar.harthikote-ma...@xilinx.com>
I tried to test your entire patch series but with bad luck. Well,
indeed I tested the patches from the github meta-xilinx repo up to
[0], not sure whether the repo is more up to date than the patches here.
The first issue is that xilinx-standalone is compatible with thud,
but on the mentioned commit (as well as on master) the
mete-xilinx-bsp layer is compatible with sumo only. I solved by cherry-picking
[1].
Then I followed the instructions in README.md and 'bitbake newlib' ran
successfully.
But 'bitbake pmu-firmware' gives:
microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift
-mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul
-mxl-soft-div --
sysroot=/home/ceresoli/temp/prova-thud-
xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot
-o executable.elf pm_master.o pm_api.o xpfw_error_manager.o
xpfw_restart.o pm_config.o xpfw_mod_legacy.o pm_requirement.o
pm_node_reset.o pm_core.o pm_system.o pm_common.o xpfw_xpu.o
pm_gic_proxy.o xpfw_aib.o xpfw_events.o pm_binding.o
pm_mmio_access.o xpfw_scheduler.o pm_slave.o xpfw_mod_pm.o
pm_ddr.o pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o
pm_usb.o pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o
xpfw_mod_wdt.o pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o
idle_hooks.o xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o
xpfw_mod_dap.o xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o
xpfw_module.o pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o
pm_gpp.o pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o
pm_notifier.o xpfw_start.o - MMD -MP -Wl,--build-id=none
-I/home/ceresoli/temp/prova-thud-
xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot/usr/include
-Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group
-Wl,--start-group,-lxilfpga,-lxilsecure,-lxil,-lgcc,-lc,--end-group
-nostartfiles -Wl,--gc-sections
-L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib
-Tlscript.ld
lto1: fatal error: multiple prevailing defs for 'XUsbPsu_DisableIntr'
compilation terminated.
lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit
status compilation terminated.
/home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
l-v9.2-bs-
cmp-xilinx-elf/pmu-firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-s
ysroot-
native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil
inx-
elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
error: lto-wrapper failed
collect2: error: ld returned 1 exit status
Makefile:28: recipe for target 'executable.elf' failed
make: *** [executable.elf] Error 1
I then tried with current master-next [2] and got:
microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift
-mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul
-mxl-soft-div --
sysroot=/home/ceresoli/temp/prova-thud-
xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot
-o executable.elf pm_master.o xpfw_error_manager.o xpfw_restart.o
pm_notifier.o xpfw_mod_legacy.o pm_requirement.o pm_node_reset.o
pm_core.o pm_system.o pm_config.o xpfw_xpu.o pm_gic_proxy.o
xpfw_aib.o xpfw_events.o pm_binding.o pm_mmio_access.o
xpfw_scheduler.o pm_slave.o pm_pinctrl.o xpfw_mod_pm.o pm_ddr.o
pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o pm_usb.o
pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o xpfw_mod_wdt.o
pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o idle_hooks.o
xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o xpfw_mod_dap.o
xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o xpfw_module.o
pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o pm_gpp.o
pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o xpfw_start.o -MMD
-MP - Wl,--build-id=none -I/home/ceresoli/temp/prova-thud-
xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot/usr/include
-Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group
-Wl,--start-group,-lxilfpga,-lxilsecure,-lxilskey,-lxil,-lgcc,-lc,--e
nd-group -nostartfiles -Wl,--gc-sections
-L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib
-Tlscript.ld
/home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
l-v9.2-bs-
cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s
ysroot-
native/usr/bin/microblazeel-xilinx-elf/../../lib/microblazeel-xilinx-
elf/gcc/../../../libexec/microblazeel-xilinx-elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
cannot open linker script file xilinx.ld: No such file or directory
collect2: error: ld returned 1 exit status
lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit
status compilation terminated.
/home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
l-v9.2-bs-
cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s
ysroot-
native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil
inx-
elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
error: lto-wrapper failed
collect2: error: ld returned 1 exit status
Makefile:28: recipe for target 'executable.elf' failed
Am I doing something wrong?
I tried replicating the issue but I am unable to do so.
Do you have pmu-firmware in a different tmp work directory?
I have the following in my local.conf
MACHINE="zynqmp-pmu"
DISTRO="xilinx-standalone"
GCCVERSION="7.%"
TMPDIR="${TOPDIR}/pmutmp"
And run as bitbake pmu-firmware
I'm not trying the multiconfig setup yet. I'm trying to set up the standalone
layer as
per its README.md and get a pmufw binary out of that.
This is not multiconfig, just regular build. Maybe GCCVERSION="7.%" is missing
in your setup, we should add it to MACHINE and README as well
Good catch! Adding GCCVERSION="7.%" to conf/local.conf pmu-firmware builds.
Thanks for the very fast reply!
Setting the GCCVERSION is a temporary fix, until GCC 8 works properly on
microblaze, were just trying to get a little bit ahead, but yes, it is
necessary for now.
Alejandro
--
_______________________________________________
meta-xilinx mailing list
meta-xilinx@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx
