Hi Alex, You need additional patches on pmu-firmware See: https://lists.yoctoproject.org/pipermail/meta-xilinx/2019-January/004198.html
Thanks, Manju From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx-boun...@yoctoproject.org] On Behalf Of Alexander Kerner Sent: Monday, January 28, 2019 10:56 AM To: meta-xilinx@yoctoproject.org Subject: [meta-xilinx] ZCU102 boot issue Hello, I've got a ZCU102 rev 1.1 board and I'm trying to build yocto using this howto: https://github.com/Xilinx/meta-xilinx/blob/master/meta-xilinx-bsp/README.building.md<https://deref-gmx.net/mail/client/NgBoDu97n30/dereferrer/?redirectUrl=https%3A%2F%2Fderef-gmx.net%2Fmail%2Fclient%2F1X81DlUuBUE%2Fdereferrer%2F%3FredirectUrl%3Dhttps%253A%252F%252Fgithub.com%252FXilinx%252Fmeta-xilinx%252Fblob%252Fmaster%252Fmeta-xilinx-bsp%252FREADME.building.md> There is following error while booting: U-Boot SPL 2018.01 (Jan 25 2019 - 21:16:27) EL Level: EL3 Trying to boot from MMC1 reading u-boot.bin reading atf-uboot.ub reading atf-uboot.ub NOTICE: ATF running on XCZU9EG/silicon v4/RTL5.1 at 0xfffea000 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v1.5(release):xilinx-v2018.3 NOTICE: BL31: Built : 21:23:57, Jan 25 2019 PMUFW: v1.1 zynqmp_clk_get_peripheral_rate mio read fail failed to get rate zynqmp_clk_get_peripheral_rate mio read fail failed to get rate I also tried to boot pre-build petalinux 2018.2 image and it worked fine. Here is my build configuration: BB_VERSION = "1.40.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "aarch64-poky-linux" MACHINE = "zcu102-zynqmp" DISTRO = "poky" DISTRO_VERSION = "2.6.1" TUNE_FEATURES = "aarch64" TARGET_FPU = "" meta meta-poky meta-yocto-bsp = "thud:cc73390a75d98b96eb861ae0624283c1ea6ef1bd" meta-xilinx-bsp meta-xilinx-standalone meta-xilinx-contrib = "thud:c42016e2e6ca13e133fdb877785ec8aa2bd82f16" Build Configuration: BB_VERSION = "1.40.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "aarch64-poky-linux" MACHINE = "zcu102-zynqmp" DISTRO = "poky" DISTRO_VERSION = "2.6.1" TUNE_FEATURES = "aarch64" TARGET_FPU = "" meta meta-poky meta-yocto-bsp = "thud:cc73390a75d98b96eb861ae0624283c1ea6ef1bd" meta-xilinx-bsp meta-xilinx-standalone meta-xilinx-contrib = "thud:c42016e2e6ca13e133fdb877785ec8aa2bd82f16" Build Configuration: BB_VERSION = "1.40.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "microblazeel-xilinx-elf" MACHINE = "zynqmp-pmu" DISTRO = "xilinx-standalone" DISTRO_VERSION = "1.0" TUNE_FEATURES = "microblaze v9.2 barrel-shift pattern-compare" TARGET_FPU = "fpu-soft" meta meta-poky meta-yocto-bsp = "thud:cc73390a75d98b96eb861ae0624283c1ea6ef1bd" meta-xilinx-bsp meta-xilinx-standalone meta-xilinx-contrib = "thud:c42016e2e6ca13e133fdb877785ec8aa2bd82f16" Kind regards Alex
-- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx
