Hi Mike, > -----Original Message----- > From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx- > boun...@yoctoproject.org] On Behalf Of Mike Looijmans > Sent: Friday, February 01, 2019 12:19 AM > To: meta-xilinx@yoctoproject.org > Subject: Re: [meta-xilinx] ZCU102 boot issue > > On 30-01-19 14:13, Jean-Francois Dagenais wrote: > > Hi guys, > > > >> On Jan 28, 2019, at 14:39, Manjukumar Harthikote Matha > >> <manju...@xilinx.com <mailto:manju...@xilinx.com>> wrote: > >> > >> Hi Alex, > >> You need additional patches on pmu-firmware > >> See:https://lists.yoctoproject.org/pipermail/meta-xilinx/2019-January > >> /004198.html > > > > Manju, thanks for your patience and diligence in answering this yet another > > time. > > > > In my experience, when such an issue is raised again and again, it > > means it will not go away and it costs a lot in loss of time, money > > and most importantly, spirit ;) > > > > I know it's been discussed before too but if I may add my 2 cents: Am > > I missing something or without manually patching pmu-firmware, the > > boards in the meta-xilinx-bsp will not function because of the missing > > config object? (I still use meta-xilinx-tools so I actually don't > > know.) Doesn't this mean Xilinx doesn't fully support the open-source > > workflow? Or is just the word "support" that should be replaced with > > "participates"? (In which case it is indeed directly responsible for > > it) > > > > I remember problems with the licensing, but there has to be a > > solution. Even if not elegant, once automated in yocto recipes, it's > > better than nothing and a broken board after 5 hours of building! > > > > And if this is still not possible, to help people find the very > > un-obvious source of their issues, perhaps PMU firmware could suffix > > "(no cfg obj)" to its version? Or anything else printed early which > > will help people find a xilinx wiki page explaining the problem and the > > solutions > available. > > > > Simplest solution here would be to just integrate that "default config" patch > into the > standard PMU firmware and then all boards will just boot. It won't prevent > the FSBL > changing the config, so that flow isn't affected negatively. >
Please do send a patch if you have for pmu-firmware "default config". We will take a look at having them integrated. > If licensing of my patch is an issue, I'm happy to change the license from > GPL into > whatever Xilinx needs it to be to be able to integrate it. Thanks, Manju -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx