> -----Original Message-----
> From: Mike Looijmans [mailto:mike.looijm...@topic.nl]
> Sent: Thursday, March 21, 2019 5:55 AM
> To: Manjukumar Harthikote Matha <manju...@xilinx.com>; meta-
> xil...@lists.yoctoproject.org
> Subject: Re: Loading FPGA firmware broken in 2018.3
>
> On 21-03-19 07:33, Mike Looijmans wrote:
> > On 20-03-19 18:46, Manjukumar Harthikote Matha wrote:
> >> Hi Mike,
> >>
> >> We tested by loading both the vivado generated and bootgen generated
> >> bitstreams using 2018.3 and it worked fine, we are able to see Done
> >> and leds glowing as per our design.
> >>
> >> Is it a custom board or zcu102?
> >
> > Custom board (the Xilinx Drone Platform actually)
> >
> >> Do you need this patch on thud?
> >>
> >> https://github.com/Xilinx/meta-xilinx/commit/2c98fa11ccf33b6d9a550beb
> >> f50d2a2a876f9afb
> >
> > Might be, from the description it sounds like "the FPGA configuration
> > code is non-functional" is what I'm experiencing here.
>
> Built the PMU with the above patch, and now programming the PL works.
Thanks, will backport to thud
Thanks,
Manju
--
_______________________________________________
meta-xilinx mailing list
meta-xilinx@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx
