On 9/22/04 10:30 AM, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote:
> Ken Ray wrote: > >>> Also not sure how to control the marks - it would make sense if they >>> were representing the pageInc value - but it is a smaller setting. >>> >>> >> >> It actually represents the pageInc value *plus one* (I'm assuming for the >> "0" setting). So if I set up a scale with a min of 0 and a max of 100, with >> a pageInc of 10 and a lineInc of 1, I'll get 11 tick marks, for: >> >> 0 10 20 30 40 50 60 70 80 90 100 >> > > Well actually not: if you set the pageInc to 11 you get the thumb to > jump 10 steps, That's true, but I'd set it the pageInc to 10 not 11... > but the markers see to be separated in steps of 8.3 (ie > 83 / 10) > > To get tick marks like this (for the scale running from 0 -100): > > 0 10 20 30 40 50 60 70 80 90 100 > > You need to set the pageInc to 12 ! And then of course clicking on the > scroll bar jumps 11. Seems logical :) Well, I get slightly different results, but the issue is the same. After checking again here's how I got the 0-100 with the proper tick marks: startValue = 0 endValue = 100 pageInc = 9 lineInc = 1 But you're right that clicking on the scrollbar jumps every 9 - and if you want to jump every 10, you need to set the pageInc to 11, which screws everything up. Sounds like a bug to me... Ken Ray Sons of Thunder Software Web site: http://www.sonsothunder.com/ Email: [EMAIL PROTECTED] _______________________________________________ metacard mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/metacard