Sorry about the typo. I mean wrapped geometry. It can be found under Edit - Transform - Wrap
-----Original Message----- From: Jones, Michael [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 09, 2000 9:25 AM To: 'Joe Geraci'; SmartCam Users Group (E-mail) Subject: RE: [mfg-smartcam] ROTARY MILLING I use production milling to program the A axis on one of our milling machines. You need two things to make it work right. the .TMP file must have this section, or similar. @LINE < #FDMODE>< #MOV>< A#ADIR#INDXA>< X#XPOS>< Y#YPOS>< Z#ZPOS>< F#FEED> and the geometry must be rapped. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
