To save on all the redraws it does try the GRAPHIC_ON and GRAPHIC_OFF macro commands as follows...
// FreeForm_Machining 4.6 HP-UX,A.09.01 09/06/95 10:19:58 Macro File // /disk/ron/wrkpln.mcl // CREATED: 02/16/96 // // GRAPHIC_OFF[]// turns graphic display windows off // Auto_Answer[AA=OK] SELECT_ALL[] PCHG_WP[WP="XZ_PLANE"] PCHG_WP[WP="YZ_PLANE"] PCHG_WP[WP="XY_PLANE"] NEW_GRP[] REDRAW[] // GRAPHICS_ON[]// turns graphics display windows on -----Original Message----- From: Ron Klutts <[EMAIL PROTECTED]> To: 'John Wright' <[EMAIL PROTECTED]>; '[MFG-SMARTCAM]' <[EMAIL PROTECTED]> Date: Wednesday, June 21, 2000 1:20 PM Subject: RE: [mfg-smartcam] Macro anybody? >John, > >Here's a macro I use that will put everything it can on the XZ, then YZ, and >finally XY workplanes. I then kill the workplanes the manual way. I haven't >figured out how to do it in the macro. Also if the file is big (lots of >surfaces, it helps to zoom in for all the redraws it does.) > >Ron Klutts > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED]]On Behalf Of John Wright >> Sent: Wednesday, June 21, 2000 12:37 PM >> To: [MFG-SMARTCAM] >> Subject: [mfg-smartcam] Macro anybody? >> >> >> Hi all >> Im not much of a macro writer but have recorded a few . >> Im needing a macro that will unreserve all workplanes and >> then kill them in >> one shot. >> Knowing that smartcam wont kill planes with geometry on them >> I dont like the >> clutter >> from unused auto planes. >> I have tried to record the moves I use but it doesn't work. ? >> >> >> Thanks John Wright >> >> ====================================================================== >> To find out more about this mailing list including how to unsubscribe, >> send the message "info mfg-smartcam" to [EMAIL PROTECTED] >> ====================================================================== >> >> > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
