I'm not sure but I think if you put the .PCB files in the sm11\shared directory it may fix the problem.
Greg King Group Leader Manufacturing Services Rittal Corporation 937-399-0500 Ext. 3371 [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, June 29, 2000 2:13 PM > To: [EMAIL PROTECTED] > Subject: [mfg-smartcam] Stumped on CTK problem > Importance: High > > Hi all, > I have a series of ctk panels that access macro commands through > action buttons. These macro commands program various types of holes, such > as: Spot-Drill-Tap, Spot-Drill-Bore, etc. These panels and macros have > worked fine since their inception. > I had to produce a whole new set of panels for metric workpieces. I > felt that the easiest way to do this was to open the panels in CTK and do > a > save-as and give it a metric designation, then go through each action > button, rename it, and point it to the equivalent metric macro. Saves a > lot > of time, right? Well it worked fine for the new metric panels, but here's > the stumper: Every original panel that I did a save-as to now shows the > metric panel when in Smartcam, not the original. When I open the original > panel in CTK, it still shows the original panels! I double-checked the > .ini > file [UserMenu] and everything is correct; separate lines for the original > and for the metric panels. What you access in Smartcam is NOT the same as > what you open in CTK. It's as if some sort of association was made in the > panels when I did the save-as (bug?). > I'll head off the simple questions: > Yes, I closed and re-opened Smartcam after every .ini file change. > I double and triple checked all pertinent paths and file names. > I tried renaming the .pcb files and changing the .ini [UserMenu] > definitions to match. > > Nothing works. I am stumped. Any help would be greatly appreciated. > Thanks, > > Chris > > (See attached file: Pcb Stumper.ZIP) > << File: .ZIP File >> ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
