|
Also
have a look at the heidenhain web site and download the FREE communicate
software called TNCREMO, for these
controls - it's excellent (and
FAST).
Dave
Whiteley, Envisage UK Ltd
-----Original Message-----
From: Jeff Pieper [mailto:[EMAIL PROTECTED]] Sent: 15 March 2001 03:23 To: SmartCAM List Server Subject: [mfg-smartcam] Communicate Alan,
We use ProComm Plus for downloading
files to the machine control.
It's operator friendly and very easy to
setup and use.
Before that we had Cimnet Folders which
was very expensive and cumbersome
to load all the information. Needless to
say we got rid of it.
As for uploading, we don't allow
uploading programs on the floor.
Our operators write down edits on the
program hard copy and we update
SmartCAM to output the correct code.
This way the graphics are always
current for updates and revision
changes.
Jeff Pieper
CNC Programmer
 Alan Wrote: program files between a PC (Win 95b) and our Mazak (M1, M32, T2, T3, T32-2) and Heidenhain TNC 415b controllers. We are only wanting to transfer the files to the PC for storage and back up, ie not for drip feed nor editing etc. What are you using and what are your comments? Regards Alan Gordon |
- [mfg-smartcam] Communicate Jeff Pieper
- Envisage UK Ltd
