I counted the holes myself and got the same number as you so I must have duplicated a bunch of holes.
I knew it was something dumb on my part it's been one of those days
Thanks to everybody for your quick responses this group is the best Butch
At 03:43 PM 10/16/2003 -0400, Bob Manganello wrote:
I calculate 2765 holes and when I coded it through a G & L code gen I got a little over twice that many lines of code. I think you have holes on top of holes (same x and y) therefore no code comes out for that hole.
-----Original Message----- From: Butch Bell [mailto:[EMAIL PROTECTED] Sent: Thursday, October 16, 2003 3:33 PM To: Bob Manganello; [EMAIL PROTECTED] Subject: RE: [mfg-smartcam] Missing holes???????
Bob,
I have already tried renumbering the file just to be sure and it is a complete program with the M30 at the end. The G code file is included in the zip file I sent in the first post.
Thanks for the quick response Butch
At 03:18 PM 10/16/2003 -0400, Bob Manganello wrote: >Without looking at everything, my first guess would be >1. SmartCam starts renumbering after 9999.(Maybe everything is there) >2. Are you giving the code time to complete before opening the file. >3. Does the file contain the program ending code(s) (M2 OR M30)? > >-----Original Message----- >From: Butch Bell [mailto:[EMAIL PROTECTED] >Sent: Thursday, October 16, 2003 2:18 PM >To: [EMAIL PROTECTED] >Subject: [mfg-smartcam] Missing holes??????? > > >Hi guys, > >I'm trying to center drill and drill 3730 holes but when I code it I get >only 5540 lines of code. >Smartcam shows 7510 elements of which 48 are on layers not tools so I >should have over 7510 lines of code!!! >I also tried coding 1 tool and ended up with 2771 lines of code. >What am I missing here can this be a problem with my .tmp file? >Any help I can get would be appreciated because I do not have a clue what >is wrong. >I have included my pm4, jos and gcode files for everybody to look at. > >Thanks in advance >Butch
====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
