Re: [mfg-smartcam] @FXD @OP_DRL @COOLNT

[Bill Payter]

Okay thanks guys,   As you guess, I'm used to using logic in @FXD sections, I'll try using the 'new' sections.   I was calling the @COOLNT section wrongly.   Thanks again,   Bill in the UK. ----- Original Message ----- From: Bob Manganello To: Bill Payter ; SmartCAM Users Sent: Friday, March 05, 2004 12:56 PM Subject: RE: [mfg-smartcam] @FXD @OP_DRL @COOLNT Only 5 fxd sections Op section for every operation   Exe. Spot drill , reamers , counter bores , counter sinks and milling cutters all use one fxd section @op sections allow you to have each of those tools use different code as needed without having to build logic into the template. They will use their @op section. Each tool looks for the @op section first and if none exist it will use the @fxd section.   Hope this helps. Bob M.     -----Original Message----- From: Bill Payter [mailto:[EMAIL PROTECTED] Sent: Friday, March 05, 2004 5:02 AM To: SmartCAM Users Subject: [mfg-smartcam] @FXD @OP_DRL @COOLNT Hi guys,   What is the difference between using the 'old' @FXD1 etc. drilling sections and the 'new' @OP_DRL sections?   Also, trying to use the @COOLNT section to output flood, thro or air coolant always returns the value of 4 regardless of what I've chosen in the planner! Any ideas? Perhaps somebody could send me an example from their working template file.   Regards,   Bill in the UK.