This is how we double the time on a machine that we run at 50%. In the .tmp
#EVAL(#V2=#TLTIME*2) (MSG, TOOL CYCLE TIME = #FMT(#V2,D3.1) MIN. Hope this helps. Bob M. -----Original Message----- From: Kevin Clark [mailto:[EMAIL PROTECTED] Sent: Monday, March 08, 2004 11:24 AM To: [EMAIL PROTECTED] Subject: [mfg-smartcam] Calculating total machine times Is there a way to add times for pallet rotations and tool changes into the JOS(nc_runtime) Right now JOS(nc_runtime) is used to calculate estimated run times for the machine. I went into the SMF editor and changing some of the settings do not change time on the code. In the SC Code Generation Guide in the Template word reference section there is #TIME I am wondering how you can either add all the #TLTIME or add the #TIME to the JOS(nc_runtime) to get a more accurate reflection on actual runtimes. Any help would be appreciated. Thanks in advance. Kevin Clark Programmer Abbott Workholding Inc. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ====================================================================== ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
