This is how I added time to my tapping cycle. #IF(#CYCLE=0)<#EVAL(#TIME=.075)>
Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: "Kevin Clark" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 08, 2004 11:23 AM Subject: [mfg-smartcam] Calculating total machine times > Is there a way to add times for pallet rotations and tool changes into the > JOS(nc_runtime) > Right now JOS(nc_runtime) is used to calculate estimated run times for the > machine. > I went into the SMF editor and changing some of the settings do not change > time on the code. > In the SC Code Generation Guide in the Template word reference section > there is #TIME > I am wondering how you can either add all the #TLTIME or add the #TIME to > the JOS(nc_runtime) > to get a more accurate reflection on actual runtimes. > Any help would be appreciated. > Thanks in advance. > > Kevin Clark > Programmer > Abbott Workholding Inc. > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
