On Tue, 27 Apr 1999, you wrote:
> On Tue, 27 Apr 1999, Stephan Huebner wrote:
>
> > as some may have read I've got problems to connect to a new provider.
> > The modem-manual said I could try to set down the time (in mseconds) used by
> > the modem to answer the incoming signal. As that might be a reason for my
> > problem, I tried to set it from 6 (=60 mseconds, default) down to 1.
> > Although I save the new settings, everytime I start Miami or MiamiDX, I get
> > the message "resetting the modem" which obviously changes the settings back
> > to default settings.
> > Can I prevent this somehow?
> > (And before someone asks, I write back the changed settings via at&w and
> > resetted the modem via atz! so it should work. And it shows the changed
> > settings as long as I don't start Miami(dx)).
>
> I'm not sure "ATZ!" will do that. It's intended to reset the *hardware*;
> I'm not sure it reloads the saved settings.
>
ATZ by default will reset the modem to the default stored config on the
majority of modems.
--
Regards,
Deryk Robosson
// [EMAIL PROTECTED]
// http://linux.tc3net.com/newlook
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
