On Saturday August 05 2000, Joseph Duchatelet said to All:
JD> Having been able to buy some more memory recently for my A2000
JD> (bringing it to 8 MB RAM), i reconfigured my workbench in 16 colors. I
JD> discovered that this made my connection to my ISP fail. (As i was told
JD> starting up MiamiInit as a test to identify the origin of my problems)
Are you using the internal serial port? What CPU are you using?
16 colours (in hi-res) with the 68000 and internal port will most likely fail
- there isn't enough power available to drive it.
JD> Miami complains about my foremost screen only. I often use Dopus on an
JD> other screen in 4 colors. I have tried to add an icon tooltype
JD> 'PUBSCREEN=DOPUS" and other likely names with no succes.
Open Miami (you use the MUI GUI library?) and select "MUI Settings" from the
Settings pull down menu. On the System page select the DOPUS screen as the
one to open on. Start DOpus first then you can select the correct name from
the list, rather than type it in.
JD> - When i don't use Dopus could i open Miami on its own screen ? How
JD> should i do that ?
As above, but select "Call Inspector" and create a Miami screen. /Then/ save
and in MUI Settings select that screen from the pop down list.
JD> Is the idea valid at all: will i experience communications problems
JD> when i return to my 16 colors WB, after having started miami on its 4
JD> colors screen. I don't understand really why Miami has this problem at
JD> all, since i can browse on an other screen in 16 colors easily.
During browsing Miami can compensate for serial errors, but while the link is
being established there isn't such a good layer of error correction.
--
Neil Williams, 0,0. mailto:[EMAIL PROTECTED] ICQ:18223711
http://www.aio.co.uk http://www.tkgbbs.freeserve.co.uk fiydoh 2:442/107
Zeus Developments, comms s/w: http://www.bleach.demon.co.uk/zeus/
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
