Hello Miami list, OK, a couple days ago I posted a problem I was having getting Miami 3.2b to communicate with my modem. It was suggested that my problem might lie with the serial port on my GVP G-Force 040 and rotten drivers thereof. But if this is the case, can anyone tell me why Miami 1.1 is able to communicate perfcetly with the modem (on the same serial port etc.) and dial out without errors? Also I have noticed someone with a Hypercom 3+ on this list who is having the same problem I have so I wonder if this problem isn't of a more universal nature. The only thing that I can think of is that Miami 3.2 is using ClassAct whereas Miami 1.1 uses MUI. Could ClassAct be the culprit on my particular setup? (please don't laugh at me if this is ludicrous, I'm no programmer, just some girl trying to solve computer problems with logic and gut instinct :-\ ) With this in mind, I downloaded the MUI modules from the NordicGlobal website BUT... even after putting the MUI.Miamigui and MUI.Miamitoolsgui into Miami:Libs, neither MiamiInit nor Miami can find the modules (have tried both GUI=MUI in Tooltypes and selecting from string gadget on GUI page of Miami- only the ClassAct choice is given). Please, someone, help! I am totally defeated :( ...I'd use Miami 1.1 only this just seems such a bad solution with a much more advanced version of the program available... Oh yes... my system= A2000, GVP G-force 040/33, OS 3.5 +BB1, Spectrum, P96 -- To unsubscribe send "unsubscribe miami-talk-ml" to "[EMAIL PROTECTED]". For help on list commands send "help" to "[EMAIL PROTECTED]".
