I was in the process of finding a proper WG SNS value. The manual actually says to find WG SNS based on boost target (page 18):
" A value of WG SNS needs to be found that allows the boost to rise up to BOOST TGT without overshooting. If the boost fails to reach BOOST TGT, raise WG SNS. If the boost pressure goes past BOOST TGT, stop accelerating and lower WG SNS." Therefore since my first WG SNS value of 44 surpassed the target, I dropped it to 42 and lost all boost control activity. Then I raised it to 43 and no boost control, and then back to 44 and no boost control. Is that not odd? And depower/repowering still shows the proper stored values in the ecu. Or am I not understanding that properly? I have lots of logs- will get to them on the pc shortly. thanks, rob On Jun 20, 2008, at 2:11 PM, Ray Ayala wrote: > And FWIW SNS should be based on your turbo, not on your boost > target. The Link manual describes how to determine the SNS > setting, and that needs to be done before the other adjustments are > set up. _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
